PRODUCTS
VR
  • Products Details

Guangzhou Ideal beauty equipment Co.,ltd has always attached great importance to the pain points of the industry. The newly launched products are specially developed to solve the pain points of the industry, which perfectly solve the pain points of the industry and are enthusiastically sought after by the market. PRODUCTS Guangzhou Ideal beauty equipment Co.,ltd have the aspiration to become a leading enterprise in the market. To achieve this goal, we will continually follow the market rules strictly and make bold changes and innovations to cater to market trends.

Type:Microdermabrasion MachinePlace of Origin:Guangdong, China
Brand Name:IDEALModel Number:M025
Feature:Exfoliators, Pigmentation Correctors, Skin Rejuvenation, Skin Revitalizer, dermabrasion facial peelApplication:For Commercial
Warranty:1 YearAfter-sales Service Provided:Free spare parts, Online support
Product name:Dermoabrasion punta de diamantestyle:portable microdermabrasion
feature:microdermabrasion diamond peelingfunction:dead cell remover, facial peeling
application:salon, beauty center, homeService:OEM
Color:whiteCertification:CE, ce
MOQ:1pcwarranty:1 year

Dermoabrasion punta de diamante (M025)

Dermabrasion punta de diamante (M025)

Introduction
The Micro-crystal Dermabrasion was designed by Italian Florence's Mattioli at first, until now had over 20 years' history. This kind of technology only supplies to the dermatology expert and doctor at first uses, but more and more SPA House & Beauty Saloon also gradually uses, it was called the best method of medical beauty. This method successfully has developed in Europe for several years, cures patient thousands of examples, and has obtained the extremely satisfactory effect
Now we want to introduce the Diamond Dermabrasion, it is a creative improvement of the Micro-crystal Dermabrasion. The Diamond Dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then Vacuuming out the particles along with any dirt and dead skin back up. This procedure removes skin debris, imperfections, blemishes, wrinkles and unwanted pigmentation on the skin. Moderate usage of Diamond Dermabrasion, accompany with skin products that penetrate through top skin layer that reach the dermis level, helps to replenish natural nutrients, restore cell activity, and promote skin health. The results after Micro Dermabrasion treatment is usually a healthy, glowing, beautiful skin
Spare part
3 stainless steel wands which are used with 9 interchangeable diamond tips

1. The higher the D number, the finer the grit
2. Clean diamond tips with Alcohol, then sterilize them with UV light or high Temperature
3. Replace the cotton filter inside the diamond tip or gas nipple after 5-6 customers treatment

Dermabrasion punta de diamante (M025)
Preparation before treatment
1. A consultation included the examination of the skin, a plan for treatment

2. Operator should wear vinyl gloves and a facemask
3. On oily or acne skin, a steamer may be used prior to the treatment, or a degreasing lotion may be applied prior to the cleanser
4. Cleansing the skin with Cleansing gel or water, then wipe off with cotton pad. Allow the skin to dry
How to use

1. Push in the movable ring of copper nozzle at the hand piece, and pull out the 6x4 size vacuum hose. Then push in the black plastic ring on the vacuum hose
2. Put a drop of cream or milk lotion on the vacuum hose nozzle, push in the movable ring and insert in the vacuum hose to the limit
3. Insert a cotton swab into the Diamond Head, then tight up the Diamond Head on the hand piece. Remove the cotton swab after every treatment
4. Turn on the power switch
5. Adjust the Vacuum intensity by Vacuum Regulator according to the following reference table, the intensity displays on Vacuum gauge and check with the client for comfort
6. Use the incline area of Hand piece to contact with the skin surface. Proceed with a slow sliding motion. Do not place the hand piece at one spot for too long, doing so will cause harm to the skin
7. Adjust the crystal flow rate by the Vacuum Regulator slowly from minimum to maximum. For commonly use, do not set the flow rate to maximum unless it is of necessity. This is for better comfort intensity
8. Gently stretch the skin with thumb and finger and glide the Hand-piece 2 to 3 times over the area being treated. Then cross again in different directions to prevent streaking lines as in the reference picture. Brush strokes or polishing motions may be used in different sites
9. After treatment, brush off all remaining dead skin with a soft brush and rinse with damp sponges or damp cool towel
10. Allow skin to dry then apply desired skin product
11. To clean the Diamond Head, use toothbrush or cotton swab damped with a little alcohol to wipe off the dirty impurity, and then use UV light or high temperature for sterilization
Recommended Vacuum Intensity

Treatment Area Normal Skin (inHg) Sensitive Skin (inHg)
Face 12-22 8-12
Forehead 12-22 10-12
Chest 15-20 15-18
Nose 10-15 10-14
Neck 18-18 10-15
Near Eye Area 8-12 8-10

Treatment Schedule Table

Treatment Frequency (days) Total Visits
Face Peeling 6-10 3-5
Fine Lines 7-13 6-8
Neck 12-14 3-5
Acne Scars 7-12 8-10
Hyperpigmentation 7-12 8-10

Notice

1. Always begin treatment conservatively and observe the effects by the touch and appearance of the skin. A vacuum power that is too high or too big may cause an inflammatory response
2. Edema and erythema can occur following treatment, but will resolve in few hours
3. Overly aggressive techniques can cause mild flaking over the next 3-4 days. Epidermis that is treated too aggressively can lead to bleeding in the superficial dermis
4. Diamond Dermabrasion should not be used on sensitive areas such as eyelids. The eyelids should be closed at all times during the procedure and may be covered with damp cotton pads
5. The following areas are considered inappropriate for treatment: Skin tumor, moles, birthmark, angioma, lips, eyes, herpes, skin cancer, and liver spots
6. Do not modify or attempt to repair the machine, contact the technician for maintenance

Accesories

Dermabrasion punta de diamante (M025)

Package

Dermabrasion punta de diamante (M025)

All-round ViewDermabrasion punta de diamante (M025)

Payment terms
-Sample Charge: T/T or Western Union

-30% deposit before production, 70% balance before shipping

Dermabrasion punta de diamante (M025)
Packing and shipping
-Standard Export Carton with fully Polyfoam or Pearl Wool

-Delivery within 5 to 15 working days upon receiving payment
After-Sales-Service
-Lifetime with professional engineer support.

-Within 1 year, supply spare parts for free if the machine has quality problem.

 

Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Recommended

Send your inquiry

Contact Us

Tell us your requirements, we could do more than you can imagine.

Get In Touch 

Inquiring about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Recommended

They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.

Chat
Now

Send your inquiry

Choose a different language
English
français
Deutsch
العربية
русский
italiano
Português
Español
日本語
bahasa Indonesia
Current language:English